Press the slash key anywhere on the page to jump to search. Use the arrow keys to move through results and Enter to open one.

CAMO.A.300 — Continuing airworthiness management exposition

On this page
Regulation section

CAMO.A.300 requires provision of a CAME and applicable referenced manuals and procedures to the authority, with all prescribed information, formal initial approval and controlled updating. Its compliance scope includes applicable Part-M and Part-ML as well as Part-CAMO.

What the CAME is for

The CAME and applicable referenced manuals and procedures document how the organisation ensures compliance with Part-CAMO and applicable Part-M and Part-ML; the document does not replace actual compliance. The CAME records the organisation's approved compliance arrangements and applicable procedures.

The organisation must work at all times in accordance with the applicable Annexes and its approved CAME, as the accountable manager's statement under CAMO.A.300(a)(1) confirms.

The accountable manager signs a statement of compliance at all times with Part-CAMO, applicable Part-M and Part-ML, and the approved CAME. When the accountable manager is not the chief executive officer, the chief executive officer must countersign.

What the CAME must contain

Among the information listed in CAMO.A.300(a), the CAME and, where applicable, any referenced associated manuals and procedures must contain: the organisation's safety policy as defined in point (a)(2) of point CAMO.A.200; the title(s) and name(s) of the persons referred to in points (a)(3) to (a)(5), (b)(2) and (f) of point CAMO.A.305; the duties, accountabilities, responsibilities and authorities of the persons nominated under points (a)(3) to (a)(5), (b)(2), (e) and (f) of point CAMO.A.305; an organisation chart showing the associated chains of accountability and responsibility between those persons; and the procedures specifying how the organisation ensures compliance with Annex Vc (Part-CAMO), Annex I (Part-M) and Annex Vb (Part-ML), as applicable, including in particular the documentation of management system key processes as required by point CAMO.A.200 and continuing airworthiness management, airworthiness review, evaluation programme and permit to fly procedures, as applicable.

The CAME and, where applicable, any referenced associated manuals and procedures must contain all of the information listed in CAMO.A.300(a).

Approval and amendment of the CAME

The initial CAME must be approved by the competent authority, and the CAME must be amended as necessary to remain an up-to-date description of the organisation.

When processes change, the CAME must be amended accordingly, and certain amendments require prior approval from the competent authority.

Amendments to the CAME must be managed through the procedures at CAMO.A.300(a)(11)(iv) and (v). Amendments outside the scope of the approved procedure for changes not requiring prior approval, and amendments related to CAMO.A.130(a) changes, require authority approval under CAMO.A.300(c). The additional prior-approval and notification conditions of CAMO.A.130 apply as well.

Rule text: CAMO.A.300

CAMO.A.300 Continuing airworthiness management exposition (CAME) (a) The organisation shall provide the competent authority with a CAME and, where applicable, any referenced associated manuals and procedures, containing all of the following information: (1) a statement signed by the accountable manager confirming that the organisation will at all times work in accordance with this Annex, Annex I (Part-M) and Annex Vb (Part-ML), as applicable, and with the approved CAME. When the accountable manager is not the chief executive officer of the organisation, then such chief executive officer shall countersign the statement; (2) the organisation's safety policy as defined in point (a)(2) of point CAMO.A.200; (3) the organisation's scope of work relevant to the terms of approval; (4) a general description of the manpower resources and of the system in place to plan the availability of staff as required by point (d) of point CAMO.A.305; (5) the title(s) and name(s) of person(s) referred to in points (a)(3) to (a)(5), (b)(2) and (f) of point CAMO.A.305; (6) the duties, accountabilities, responsibilities and authorities of the persons nominated under points (a)(3) to (a)(5), (b)(2), (e) and (f) of point CAMO.A.305; (7) an organisation chart showing the associated chains of accountability and responsibility between all the person(s) referred to in points (a)(3) to (a)(5), (b)(2), (e) and (f) of point CAMO.A.305, and related to point (a)(1) of point CAMO.A.200;

(8) a list of the staff authorised to issue airworthiness review certificates or recommendations as referred to in point CAMO.A.305(e), specifying, where applicable, the staff authorised to issue permits to fly in accordance with point CAMO.A.125(f) as well as the staff authorised to develop an evaluation programme and conduct the corresponding investigation activities in accordance with point CAMO.A.125(g);

(9) a general description and location of the facilities; (10) the description of the internal safety reporting scheme as required by point CAMO.A.202; (11) the procedures specifying how the organisation ensures compliance with this Annex, Annex I (Part-M) and Annex Vb (Part-ML), as applicable, including in particular: (i) the documentation of management system key processes as required by point CAMO.A.200; (ii) procedures defining how the organisation controls any contracted and subcontracted activities as required by point CAMO.A.205 and point (c) of point CAMO.A.315);

(iii) continuing airworthiness management, airworthiness review, evaluation programme and permit to fly procedures, as applicable;

(iv) the procedure defining the scope of changes not requiring prior approval and describing how such changes will be managed and notified, as required by point (b) of point CAMO.A.115 and point (c) of point CAMO.A.130; (v) the CAME amendment procedures. (12) the list of approved aircraft maintenance programmes for those aircraft for which a continuing airworthiness management contract exists in accordance with point M.A.201 or ML.A.201; (13) the list of maintenance contracts in accordance with point (c) of point CAMO.A.315; (14) the list of currently approved alternative means of compliance. (b) The initial issue of the CAME shall be approved by the competent authority. It shall be amended as necessary to remain an up-to-date description of the organisation.

(c) Amendments to the CAME shall be managed as defined in the procedures referred to in points (a)(11)(iv) and (a)(11)(v). Any amendments not included in the scope of the procedure referred to in point (a)(11)(iv), as well as amendments related to the changes listed in point CAMO.A.130(a), shall be approved by the competent authority.

CAMO.A.300 has applied since 24 March 2020 (Commission Implementing Regulation (EU) 2019/1383, as corrected); point (c) has applied in its current form since 24 March 2020 (Commission Implementing Regulation (EU) 2020/270). The evaluation-programme additions in points (a)(8) and (a)(11)(iii) apply from 7 August 2026 (Commission Implementing Regulation (EU) 2026/100). The current content is not limited to the older list covering airworthiness review certificates and permits to fly.

Rule text: CAMO.A.130 Changes to the organisation

CAMO.A.130 Changes to the organisation (a) The following changes to the organisation shall require prior approval: (1) changes that affect the scope of the certificate or the terms of approval of the organisation; (2) changes to personnel nominated in accordance with points (a)(3) to (a)(5) and (b)(2) of point CAMO.A.305; (3) changes to the reporting lines between the personnel nominated in accordance with points (a)(3) to (a)(5) and (b)(2) of point CAMO.A.305, and the accountable manager; (4) the procedure as regards changes not requiring prior approval referred to in point (c). (b) For any changes requiring prior approval in accordance with Regulation (EU) 2018/1139 and its delegated and implementing acts, the organisation shall apply for and obtain an approval issued by the competent authority. The application shall be submitted before any such change takes place, in order to enable the competent authority to determine continued compliance with Regulation (EU) 2018/1139 and its delegated and implementing acts and to amend, if necessary, the organisation certificate and related terms of approval attached to it. The organisation shall provide the competent authority with any relevant documentation. The change shall only be implemented upon receipt of formal approval by the competent authority in accordance with point CAMO.B.330. The organisation shall operate under the conditions established by the competent authority during such changes, as applicable. (c) All changes not requiring prior approval shall be managed and notified to the competent authority as defined in the procedure referred to in point (b) of point CAMO.A.115 and approved by the competent authority in accordance with point (h) of point CAMO.B.310.

Part CAMO Training

Building a compliant CAMO operation?

Sofema's Part CAMO course covers SMS obligations, airworthiness review processes, and the management system requirements for continuing airworthiness organisations.

View Part CAMO course

Sources

Next step Sofema Aviation Academy

Courses for CAMO.A.300

Part M Subpart I for Airworthiness Review Staff with VO

1 day · No Voice Over

Why: covers continuing airworthiness management tasks for Part-CAMO.

View course

Related training, not a regulatory requirement. Check course scope and prerequisites before enrolling.

A different role or training goal? Course Finder

Educational reference, not legal advice. Verify against the current Official Journal text linked under Sources. How this hub is made.