A certification authorisation permits the holder to sign certificates of release to service on the approved organisation’s behalf within the stated limitations.
Roles and qualifications
A certification authorisation permits the holder to sign certificates of release to service on the approved organisation’s behalf within the stated limitations. The organisation must clearly specify its scope and limits and make any code translation readily available to the staff and authorised persons.
Support staff are appropriately aircraft-rated Part-66 B1, B2, B2L, B3 and/or L licence holders working in base maintenance, not necessarily holding certification privileges. They are not simply all mechanics who do not sign the certificate of release to service. The staffing and assurance arrangements in 145.A.30(h), including its alternatives for aircraft other than complex motor-powered aircraft, and the derogations in 145.A.30(j) apply.
Except for the cases in 145.A.30(j) and 66.A.20(a)(3)(ii), certification authorisations must relate to the basic licence categories or subcategories and, except for category A, the applicable ratings under Part-66. The licence must remain valid throughout the authorisation and the holder must remain compliant with Part-66. The rating routes in 66.A.45 include the applicable individual, group and subgroup alternatives.
Component certifying staff are qualified under 145.A.30(i), Article 5(6) and 145.A.35. Article 5(6) provides that the relevant national requirements apply pending specific component-certifying requirements, except that EASA approves the requirements for maintenance organisations located outside the Union. A universal Part-66 aircraft licence is not imposed on component certification.
Competence, experience and recurrent training
Under 145.A.30(e), the organisation must establish and control the competency of maintenance, airworthiness review, safety management and compliance monitoring personnel through a procedure and to a standard agreed with the competent authority. That competency includes an understanding of safety management, human factors and human performance appropriate to each person’s function.
Certifying staff and support staff must adequately understand the relevant aircraft or components and the associated organisation procedures. For certifying staff, this must be achieved before the certification authorisation is issued or reissued. Both groups must have at least six months of actual relevant aircraft or component maintenance involvement in any consecutive two-year period. This means working in that maintenance environment while exercising the authorisation privileges and/or actually maintaining at least some systems of the aircraft type or group specified in the authorisation.
Both groups must receive sufficient recurrent training in each two-year period to keep their knowledge of relevant technologies, organisation procedures and safety management, including human-factor issues, up to date. The organisation must establish the recurrent-training programme and procedures for compliance with 145.A.35 and Part-66.
Except for the unforeseen cases in 145.A.30(j)(5), the organisation must assess all certifying staff for competency, qualifications and capability to perform their intended certifying duties, in accordance with a procedure in the maintenance organisation exposition (MOE), before a certification authorisation is issued or reissued.
Issue, responsibility and access
The organisation must issue the certification authorisation when 145.A.35(a), (b), (d), (f) and, where applicable, (c) are satisfied. Continued validity depends on continued compliance with (a), (b), (d) and, where applicable, (c).
The person or persons responsible for compliance monitoring under 145.A.30(c) remain responsible for issuing certification authorisations. They may nominate other persons to issue or revoke them in accordance with an MOE procedure.
The organisation must give certifying staff a documented or electronic copy of their authorisation. Certifying staff must produce it to an authorised person within 24 hours. Authorised persons are the relevant competent authority, Agency and Member State officials responsible for oversight of the maintained aircraft or component. Certifying staff and support staff must be at least 21 years old.
Specific task and exceptional authorisations
To exercise category A certification privileges on a specific aircraft type, the licence holder must complete the relevant task training with an appropriately approved Part-145 or Part-147 organisation, including hands-on practical and appropriate theoretical training, demonstrated by examination or workplace assessment. For the B2 privilege in 66.A.20(a)(3)(ii), the issuing maintenance organisation must provide the relevant task training and examination or assessment, and the holder must obtain six months of documented practical experience covering that authorisation’s scope within that same organisation.
Under 145.A.30(j)(1), base maintenance certifying staff and support staff at a location outside a territory for which a Member State is responsible under the Chicago Convention may qualify under the national aviation rules of the State where the facility is located, subject to Appendix IV. Under 145.A.30(j)(2), line station certifying staff outside such a territory may instead qualify under the national rules of the line station State or of the State of the organisation’s principal place of business, again subject to Appendix IV.
For a repetitive pre-flight airworthiness directive that expressly permits accomplishment by the flight crew, 145.A.30(j)(3) permits a limited certification authorisation based on the pilot’s flight crew licence and sufficient practical training. For operation away from a supported location, 145.A.30(j)(4) permits a limited pilot authorisation for the specified task on that licence basis, but only when the organisation is satisfied that sufficient practical training has been completed.
In the unforeseen cases under 145.A.30(j)(5), when an aircraft is grounded away from the main base without appropriate certifying staff, the organisation contracted for maintenance support may authorise one of its employees who holds equivalent type authorisations on aircraft of similar technology, construction and systems. Alternatively, it may authorise a person with at least five years’ maintenance experience and a valid ICAO maintenance licence rated for the aircraft type, but only when no appropriately Part-145-approved organisation is at that location and the contracted organisation obtains and keeps evidence of that person’s experience and licence. Every such one-off case must be reported to the competent authority within seven days after the authorisation is issued, and the organisation issuing the one-off authorisation must ensure that any such maintenance that could affect flight safety is re-checked by an appropriately approved organisation.
Application dates
The recurrent training, issue and reissue assessment, compliance monitoring and related authorisation provisions of 145.A.35 have applied since 2 December 2022 (Commission Implementing Regulation (EU) 2021/1963). Other provisions referred to on this page do not all share that date. For example, the 145.A.30(h) route for base maintenance of aircraft other than complex motor-powered aircraft using category C or L5 certifying staff assisted by support staff has applied since 13 February 2026 (Commission Implementing Regulation (EU) 2025/111).
Part 145 Training
Ready to master Part 145 compliance?
Go beyond the regulation text. Sofema's Part 145 course covers practical compliance strategies, quality system obligations, and real audit scenarios.
View Part 145 course