Sofema Aviation (SA) considers key aspects of Part GH-OPS Turnaround Coordination and Apron Safety including:
- Turnaround coordination roles (GH.OPS.400) and multi-operator interface management.
- Aircraft arrival, departure, and securing on the ground (GH.OPS.405, 410, 430).
- Equipment Restraint Area (ERA) boundary discipline and 360-degree walkarounds.
Introduction
To review the regulatory framework for aircraft turnaround coordination and apron safety, reference EU-2025-23-and-EU 2025-20.pdf. The referenced regulations specifically address multi-operator interfaces, turnaround roles, and the procedures for aircraft arrival, securing, and departure (Part-GH.OPS).
Multi-Operator Interface Management
The ground handling operational environment inherently requires interaction between multiple entities, including:
- aircraft operators,
- aerodrome operators, and
- various ground handling service providers.
Effective interface management is critical for apron safety and is legally governed by GH.OPS.010 Interfaces with other organisations.
- GH.OPS.010 governs the management of safety-critical interfaces between ground handling service providers, aircraft operators, and aerodrome operators.
- Organizations are required to identify these interfaces and strictly define their own safety accountability, authority, and responsibility within them.
- To improve ground and flight safety, they must actively share safety-relevant information, including safety reports, audit findings, and safety studies, with all interfacing entities.
- Additionally, in instances of systemic non-compliance, competent authorities use cooperative oversight to apply coordinated corrective actions across all affected stations in a uniform manner.
Key elements of interface management include:
- Identification of Interfaces: Ground handling organizations must identify safety-critical interfaces with other stakeholders and define their own safety accountability, authority, and responsibility within these interfaces.
- Safety Information Sharing: Organizations must share safety-relevant information (such as audit findings, safety reports, and safety studies) with interfacing organizations to improve ground and flight safety.
- Cooperative Oversight: In cases of systemic non-compliance, competent authorities must apply coordinated corrective actions across all affected stations to address findings in a uniform manner.
Turnaround Coordination Roles (GH.OPS.400)
Under Subpart 4 - Aircraft Turnaround, the regulation mandates strict coordination of all activities occurring during the time an aircraft is parked at the stand. The Turnaround Coordination function (GH.OPS.400) acts as a safety role that manages ramp handling activities, culminating in the safe release (dispatch) of the flight upon completion of all ground services.
The coordination process integrates several critical functions:
- Supervision of passenger boarding and disembarkation procedures.
- Oversight of aircraft loading, unloading, and unit load device (ULD) management.
- Ensuring that equipment restraint areas (ERA) remain free from obstruction and foreign object debris (FOD).
Aircraft Arrival, Securing, and Departure
The operational safety requirements for the phases of an aircraft's ground cycle are strictly categorized within the regulations to mitigate human error and equipment-related incidents. The regulations prescribe specific safety protocols for the distinct phases of ground operations to minimize human error and equipment damage.
- For aircraft arrival (GH.OPS.405) and securing on the ground (GH.OPS.410), procedures focus on ensuring the aircraft stand and equipment restraint areas (ERA) are safe before and after the aircraft parks.
- The ERA serves as a critical safety buffer zone around the aircraft that must remain entirely free from obstructions and foreign object debris (FOD), accommodating only the essential ground support equipment and personnel necessary for maneuvering.
- Aircraft departure activities (GH.OPS.430) require verified checks and the safe removal of equipment from the ERA to ensure the aircraft is secure for pushback and taxiing.
SMS Interface
To support these requirements, organizations must integrate all apron safety protocols into their overarching Safety Management Systems (SMS). The ground handling organization assumes full responsibility for the safe provision of these services and must ensure that all operational personnel are thoroughly trained and assessed on these safety-critical procedures before they are allowed to perform their duties unsupervised.
Aircraft Arrival (GH.OPS.405)
Activities upon aircraft arrival begin even before the aircraft reaches the stand. Crucial steps include:
- Checking the aircraft stand for any Foreign Object Debris (FOD).
- Verifying the surface conditions for ice, snow, or other hazards.
- Preparing ground support equipment (GSE), chocks, and cones outside the equipment restraint area.
Aircraft Securing on the Ground (GH.OPS.410)
Once the aircraft is parked, it must be safely secured. This process involves:
- Placing chocks on the aircraft wheels to prevent unintended movement.
- Setting out safety cones to clearly mark the equipment restraint area.
- Conducting an initial walkaround to inspect the fuselage, doors, and engines for pre-existing damage.
Aircraft Departure Activities (GH.OPS.430)
The departure phase requires methodical execution to transition the aircraft safely back to flight operations. Standard procedures require:
- Removal of all external equipment, such as Passenger Boarding Bridges (PBBs) and GSE, from the equipment restraint area.
- Verification that all aircraft doors and panels are properly secured.
- A final walkaround inspection and FOD check.
- Ensuring all personnel and equipment are safely outside the aircraft's danger zones prior to pushback or taxiing.
Regulatory Oversight and Standards
The following outlines the structural mapping of these operations within the ear-for-ground-handling-regulations-eu-2025-23-and-2025-20.pdf document:
- GH.OPS.010: Interfaces with other organisations
- GH.OPS.400: Coordination of aircraft turnaround activities
- GH.OPS.405: Aircraft arrival
- GH.OPS.410: Aircraft securing on the ground
- GH.OPS.430: Aircraft departure activities
Ground handling organizations must integrate these operational requirements into their Safety Management Systems (SMS) and ensure all personnel are properly trained and assessed on these critical procedures to maintain the highest levels of apron safety.
Equipment Restraint Area (ERA) Boundary Discipline
The Equipment Restraint Area (ERA) is legally defined as a safety buffer area around the aircraft that must remain free from obstruction and foreign object debris (FOD) before and after aircraft arrival and departure, as well as during aircraft maneuvering to and from the parking stand. The only exceptions permitted within this area during maneuvering are the ground support equipment (GSE) and personnel strictly required for the maneuvering process itself.
Strict boundary discipline is enforced throughout the turnaround phases:
- Prior to Arrival: Ground handling personnel must prepare all necessary GSE, chocks, and cones completely outside the equipment restraint area. Personnel must remain outside the aircraft maneuvering path and within designated safety zones.
- Upon Arrival (Securing): Once the aircraft is parked, personnel must secure the aircraft on the ground by placing chocks on the wheels and setting out safety cones to physically mark the boundaries of the equipment restraint area.
- Upon Departure: Before an aircraft can depart, personnel must ensure the removal of the Passenger Boarding Bridge (PBB) and any other external equipment and vehicles from both the aircraft and the equipment restraint area. It must also be verified that all persons and equipment are entirely outside the aircraft danger areas.
Aircraft Walkarounds
Walkarounds are mandatory visual inspections performed by ground handling personnel to identify existing damage and ensure the aircraft is safe for the next phase of its cycle.
- Arrival Walkaround: After the aircraft is parked and secured, personnel are required to perform a walkaround to meticulously inspect the aircraft fuselage, doors, and engine cowlings/propellers for any signs of damage.
- Departure Walkaround: During the aircraft departure activities, personnel must conduct another aircraft walkaround. This includes verifying that aircraft doors and panels are properly closed and performing a final check for FOD around the aircraft.
Regulatory References
These procedures are legally anchored in the following regulatory sections of Delegated Regulation (EU) 2025/20:
- Article 3 (29): Definition of the Equipment Restraint Area (ERA).
- GH.OPS.405 (Aircraft arrival): Guidelines for pre-arrival ERA clearance and personnel positioning.
- GH.OPS.410 (Aircraft securing on the ground): Requirements for setting cones to mark the ERA and conducting the arrival walkaround.
- GH.OPS.430 (Aircraft departure activities): Requirements for clearing the ERA of equipment, securing doors, checking for FOD, and conducting the departure walkaround.