Investigation and Analysis Considering Risk and Exposure – When to Perform Investigations

A structured aviation safety framework explaining when and why organizations under EASA Part-CAMO, EASA Part-145, and EASA Part-CAT must escalate routine issues into formal investigations based on risk, exposure, regulatory triggers, and the potential impact on airworthiness and certification.

20-04-2026
21 Min read

Sofema Aviation discusses how, within Part-CAMO, Part-145 (MRO), and Part-CAT (Operations), our primary function as investigators is to distinguish incidental variance (routine technical issues) from structural indicators of a legitimate threat to flight safety or organizational certification.

Authorizing a formal investigation is a calibrated decision. It must weigh the regulatory obligation of transparency and Safety Management System (SMS) requirements against the expenditure of specialized technical resources and the protection of "Just Culture" principles.


Understanding Liability: Risk vs. Exposure

The decision to transition from routine monitoring to a formal inquiry is governed by the potential for an event to compromise the Airworthiness of the fleet or the Validity of the organization’s operating certificates.


Risk

The statistical probability that a specific adverse event (e.g., an In-Flight Shutdown, a maintenance error, or a ground collision) will occur within a defined number of flight hours or cycles.


Exposure

The quantifiable and qualitative impact, safety, regulatory, or operational, should that risk be realized. In aviation, exposure may involve the potential loss of the Regulatory Approval.


The Calculation of Total Exposure

To justify the deployment of forensic maintenance teams or flight safety officers, we should utilize a quantitative model:


In this context, “Intangible Costs” refer to:

  • > The erosion of passenger and stakeholder trust.
  • > The potential loss of the "Social License to Operate" and insurance coverage.
  • > The risk of Safety Directives (SD) or Airworthiness Directives (AD) being issued against the fleet.

If the resulting value exceeds the organization’s Risk Appetite (as defined in the SMS Manual), an investigation is no longer discretionary; it is a regulatory and fiduciary requirement.


Definitive Triggers for Aviation Inquiry


Statutory and Regulatory Catalysts (EASA/FAA Compliance)

These triggers are externally imposed and carry mandatory timelines for Mandatory Occurrence Reporting (MOR).


  • > Mandatory Occurrence Reports (MORs): Any event that falls under Regulation (EU) 376/2014 (or local equivalent) where the safety of the aircraft, occupants, or third parties was compromised.
  • > Suspected Unapproved Parts (SUPs): Receipt of components with questionable traceability, fraudulent Form 1s/8130-3s, or evidence of "gray market" parts entering the MRO supply chain.
  • > Airworthiness Directive (AD) Non-Compliance: Discovery that a mandatory AD was missed or improperly embodied during a heavy maintenance check (C or D check).

Technical and Materiality Catalysts (CAMO & MRO Focus)

These indicators focus on the integrity of the aircraft's technical records and physical state.


  • > Systemic Reliability Trends: A statistically significant increase in Pilot Reports (PIREPS) or Maintenance Reports (MAREPS) regarding a specific ATA chapter that suggests a fleet-wide latent defect.
  • > Unexplained Asset Variance: Discrepancies between digital maintenance tracking systems (e.g., AMOS, Maintenix) and the physical status of the aircraft (e.g., life-limited part cycles not matching logbooks).

Operational and Safety Catalysts (The SMS Core)

These triggers involve the structural integrity of the organization’s safety barriers.


  • > Safety "Near-Miss" (High Severity Potential): An operational incident, such as a runway incursion or a maintenance "tool-left-on-board" event, that did not result in an accident but, under different variables, would have led to a hull loss or fatality.
  • > Maintenance Human Factors Breakdowns: Evidence of "normalization of deviance" where engineers consistently bypass Standard Operating Procedures (SOPs) or use unapproved tooling to meet "on-time performance" targets.

High-Exposure Scenarios in Aviation

> In certain high-liability environments, the potential exposure is so severe that an investigation is initiated regardless of the initial evidence's weight.


Executive and Nominated Person Conduct

> Allegations involving the Accountable Manager (AM) or Nominated Persons (Post Holders), such as those leading Flight Ops, Maintenance, or Crew Training, must be addressed through the Compliance Monitoring Function. Because these individuals hold the legal responsibility for the organization's certificates (AOC/Part-145/Part-CAMO), any compromise in their conduct can jeopardize the regulator's confidence in the entire management system. An independent review ensures that the "Safety Policy" remains a functional commitment rather than just a signed document.


Critical Technical & System Failures

> Events affecting safety-critical systems, including primary flight controls, engine core integrity, or structural airworthiness, require immediate elevation. Beyond the obvious safety implications, these incidents often trigger Mandatory Occurrence Reports (MORs) and require coordination with Original Equipment Manufacturers (OEMs). Investigating these failures promptly is essential for maintaining the Certificate of Airworthiness (CofA) and prevents the escalation of regulatory oversight or potential fleet grounding.


Tags:AviationSafetySMSContinuingAirworthinessMRORegulatoryCompliance

Found this useful?

Share it with your network on LinkedIn.

Share on LinkedIn
Back to Blog