Executive Overview: The EASA Framework
While the aviation industry generically uses terms like "Continuing Qualification Program" (CQP) or standard "QMS," EASA strictly defines this framework as the integrated Management System (MS) and Compliance Monitoring Programme (CMP) under Part-ORA, paired with the recurrent evaluation requirements of the Primary Certification Specification: EASA CS-FSTD Issue 1 (Annex to ED Decision 2026/008/R, effective 10 July 2026).
While initial qualification proves that an FSTD can replicate a specific aircraft, the EASA Management System ensures that it continues to do so on a continuous basis.
Management System & Compliance Monitoring (Part-ORA)
Under ORA.GEN.200 (Management System), the organisation shall establish, implement, and maintain a management system. This system must include the identification of aviation safety hazards, their evaluation, and the management of associated risks, as well as a function to monitor the organisation's compliance with the relevant requirements.
Key Structural Components
The Compliance Monitoring Manager
- The accountable manager should designate a compliance monitoring manager to ensure that the organisation's activities are monitored for compliance with applicable regulatory requirements.
- The compliance monitoring manager should have direct access to the accountable manager.
- The independence of the compliance monitoring function should be established by ensuring that audits and inspections are carried out by personnel who are not responsible for the function, procedure, or products being audited.
The Compliance Monitoring Programme (CMP)
- Under AMC1 ORA.GEN.200(a)(6), the compliance monitoring programme documentation must reflect the schedule of the monitoring programme.
- The programme must also reflect audit procedures, reporting procedures, follow-up and corrective action procedures, and a recording system.
- Management evaluations or reviews of the compliance monitoring system should be held at least quarterly to ensure the system is working effectively.
Defect Management for FSTDs
- The day-to-day procedures or working practices by which standards will be achieved must include defect reporting systems, defect rectification processes, tracking mechanisms, and preventative maintenance programmes.
- Organisations operating FSTDs are required to monitor compliance with the procedures they have designed to ensure specified performance and functions.
- As part of this compliance monitoring, the organisation should, as a minimum and where appropriate, monitor defect deferral.
Technical Baseline and Execution Requirements
The Master Qualification Test Guide (MQTG)
The technical core of recurrent FSTD qualification relies on the Master Qualification Test Guide (MQTG). The MQTG is the competent authority approved Qualification Test Guide (QTG). It incorporates the results of tests witnessed by the competent authority and serves as the reference document for future evaluations.
12-Month Recurrent Cycle
- The FSTD operator should run the complete QTG, which includes validation, functions, and subjective tests, between each annual evaluation by the competent authority.
- It is not acceptable that the complete QTG is run just prior to the annual evaluation.
- As a minimum, the QTG tests should be run progressively in at least four approximately equal three-monthly blocks on an annual cycle.
- Each block of QTG tests should be chosen to provide coverage of the different types of validation, functions, and subjective tests.
- Results should be dated and retained in order to satisfy both the FSTD operator as well as the competent authority that the FSTD standards are being maintained.
Subjective Testing
- Functions and subjective tests provide a basis for evaluating FSTD capability to perform over a typical training period and to verify the correct operation of the FSTD.
- The subjective tests listed under "Functions and Manoeuvres" should be flown out by a suitably qualified and experienced pilot.
- Subjective testing should cover those areas of the flight envelope which may reasonably be reached by a trainee.
- The test tables mandate specific manoeuvres and procedures that cover environmental extremities, such as crosswind take-offs and landings, as well as operations on a contaminated runway.
Configuration Control
- A configuration control system should be established and maintained to ensure the continued integrity of the hardware and software as originally qualified.
- There must be a timely and permanent update of hardware and programming subsequent to an aeroplane modification, sufficient for the qualification level sought.
Training Alignment and Upset Prevention and Recovery Training (UPRT)
- An FSTD shall be assessed in those areas that are essential to completing the flight crew member training, testing, and checking process as applicable.
- For UPRT, FSTDs that are used to conduct training manoeuvres where the FSTD is repositioned into an aeroplane upset condition must be evaluated and qualified.
- The FSTD should be evaluated for specific upset recovery manoeuvres, and specific guidance must be available to the instructor which clearly communicates the flight configurations and stall manoeuvres that have been evaluated in the FSTD for use in training.
Competent Authority (NAA) Oversight Expectations
While EASA establishes the regulations, the host National Aviation Authority (NAA) / Competent Authority (CA) enforces them. The sponsor's system must address specific oversight triggers:
FSTD Compliance and Notification Requirements
The organisation must inform the competent authority in advance of any major changes, including major modifications to the motion or visual system, to determine if a special evaluation is necessary. This baseline requirement is governed by EASA regulatory references ORA.FSTD.110(b), ORA.FSTD.110(c), and ORA.FSTD.230(a)(1).
Relocation
When moving an FSTD to a new location, the organisation must inform the competent authority before the planned activity.
- Prior to returning the FSTD to service at the new location, the organisation must perform at least one-third of the validation tests, as well as functions and subjective tests, to ensure the device meets its original qualification standard.
- These relocation procedures are mandated under EASA regulatory reference ORA.FSTD.230(c).
Unserviceability
The organisation's compliance monitoring manual must include specific procedures for notifying the competent authority of any major failures of a qualified device, as well as any major safety issues associated with the installation.
- This expectation aligns with the guidance provided in EASA regulatory reference GM2 ORA.FSTD.100.
Compliance Monitoring Measures & Metrics
To validate the effectiveness of the management and compliance monitoring system, the organisation operating the Flight Simulation Training Device (FSTD) must develop performance measures that can be monitored against compliance objectives. The operational reliability and compliance metrics tracked by the FSTD operator include:
- Operational Health — Compliance Measure: Training session interrupt rates & numbers of defects. Target Standard: The organisation must track training session interrupt rates and total numbers of defects to monitor overall FSTD performance and reliability.
- Maintenance Efficacy — Compliance Measure: Defect closure rates & open defects. Target Standard: The organisation must track open defects and defect closure rates to ensure that corrective actions are promptly addressed, managed, and implemented.
- Objective Compliance — Compliance Measure: Training session compliance rating & MQTG testing. Target Standard: The organisation must track training session compliance ratings. To maintain qualification, the complete set of Master Qualification Test Guide (MQTG) tests must be run progressively over a 12-month period. The MQTG serves as the definitive reference for future evaluations.
- System Availability — Compliance Measure: FSTD availability. Target Standard: The organisation must track overall FSTD availability, which includes evaluating the availability rate and accounting for any lost training hours.
Typical Ranges of Acceptable Values for FSTD Performance
Based on the applicable certification specifications and qualification standards for flight simulation training devices, typical acceptable values and tolerances include the following:
- Operational Reliability and Availability: Training uptime availability is expected to be greater than 98% of scheduled versus actual training hours.
- Maintenance Discrepancy Clearance: Greater than 95% of technical discrepancies or snags should be closed within 72 hours.
- Transport Delay / Latency: The maximum permissible transport delay from a pilot's primary flight control input to the response of the motion, visual, or instrument systems should not exceed 150 ms for higher-level FFSs, and up to 300 ms for specific FTDs, FNPTs, and BITDs.
- FSTD Background Noise Limits: Unweighted 1/3-octave band sound levels for background noise must fall below acceptable limits defined by specific points, such as a maximum of 70 dB at 50 Hz, 55 dB at 1,000 Hz, and 30 dB at 16 kHz.
- Recurrent Sound Frequency Response: During recurrent evaluations, 1/3-octave band amplitudes cannot exceed ±3 dB compared to initial qualification results, and frequency response variations cannot exceed ±5 dB across three consecutive bands with an average absolute difference not exceeding 2 dB.
Critical Pitfalls & Deep-Dive Oversight Challenges
Compliance Pitfalls
- Configuration Drift: Failure to replicate real-world aircraft fleet modifications (ADs/SBs) in the FSTD, introducing negative training risks.
- MQTG Tests: Technicians signing off on out-of-tolerance MQTG plots without executing formal Root Cause Analysis (RCA).
- Hardware Obsolescence: Sourcing obsolete COTS legacy hardware leading to unapproved reverse-engineering that invalidates the CS-FSTD baseline.
Complex Oversight Challenges
- The "Black-Box" Software Dilemma: Heavy reliance on OEM proprietary software for flight controls. When anomalies occur, sponsors cannot edit code and must await OEM patches, leaving the device operating under long-term temporary mitigations while remaining legally liable under EASA rules.
- Subjective Evaluator Currency: Evaluators spending extended time in the simulator without recent real-aircraft flying lose their baseline, inadvertently grading against historical simulator quirks rather than true aircraft aerodynamics.
- Regulatory Lag in Emerging Tech: Integrating novel features (AI ATC environments, mixed-reality flight devices) challenges prescriptive CS-FSTD frameworks, requiring early engagement with the Competent Authority to establish alternative means of compliance (AltMoC).
Industry Best Practices
- Automated Qualification Testing (AQT): Automated MQTG runs scheduled during overnight maintenance windows flag out-of-tolerance results instantly, eliminating manual errors.
- Flight Data Monitoring (FDM) Correlation: Feeding real-world fleet FDM data into the FSTD QA workflow to compare operational fuel burns and handling qualities against current fleet behavior.
- Predictive Maintenance: Tracking component degradation curves (e.g., visual projector lamps, hydraulic actuators) to replace parts prior to in-service failures.
Compliance Matrix
When auditing an EASA FSTD sponsor, request their Compliance Matrix.
- A mature organization maintains a live cross-reference document mapping every paragraph of EASA Part-ORA and CS-FSTD Issue 1 directly to chapters in their Management System manual.
- The absence of this matrix generally signals a reactive program prone to Level 1 or Level 2 audit findings.
Next Steps